<div>Attached here is the procedure.</div> docs.google.com Procedure By: Myesha Z 85 Making the roof of the machine: Take your 40x40cm cardboard and cut a 10x10cm hole at the bottom middle corner. Cut 2 40x5cm pieces of cardboard ad make 2 intent...
<div><span style="font-size:16px;">List Of Materials</span></div><div><br></div> docs.google.com List Of Materials
<div>Instead of how I originally planned for this claw to work, I used nylon strings with a solder instead of toothpicks with hot glue, as the nylon strings cause less friction.</div>
<div>This is our scale drawing which was made by Ayush.</div>
<div>First attempt:</div>
<div>I changed the claw deign to the following as the cardboard was not strong enough to support it.</div><div><br></div>
<div>Instead of using stuffed animals, I used bean bags.</div>
<div>The water connection was hard to make as there were many air bubbles.</div>
<div>Here is an image of our design.</div>
<div>This is the rods we used on the inside instead of dowels.</div>
<div><span style="font-size:16px;">IMG 2702</span></div><div><br></div><div>Hydraulic Claw</div><div><br></div> youtu.be Hydraulic Claw